• Uniden Scanner Manuals On Pdf
• Free Pdf Manual Download
• Uniden Download Page
• Free Uniden Manuals
• Uniden Dect 6.0 User Manual
• Uniden Gmr1038 2 Manual

Product Filename Version Description Size Release Date; BCT15: PL-2303 Driver Installer.exe: Driver Installer for USB-1 cable You must run this installer prior to.

1. Official Uniden 🔧Designed & Engineered in Japan 🇯🇵 Made for Australia 🇦🇺UHF, Dash Cams, Home Security, Baby Monitors Tag @unidenaustralia or #Uniden. Instagram post 457453238. Instagram post 257853238. Instagram post 365653238.
2. R1 – “Uniden R Series SW Download Tool and Firmware” R3 – “Uniden R Series SW Download Tool and Firmware” After downloading, extract the files to a new folder. Run “Uniden R Series SW Download Tool V1.22.msi” After download tool is installed, run “Uniden R Series SW Download Tool V1.22” from newly created shortcut.

T R U 2 4 1

I N T R O D U C T I O N The Uniden® 2.4 GHz cordless phones are designed and engineered to exacting standards for reliability, long life, and outstanding performance.

Digital Spread Spectrum Technology utilizes a “wider frequency band” vs. a “single narrow band” used in standard digital transmissions. The 2.4 GHz frequency range was recently released to commercial communications. It provides secure conversation with the clarity of digital sound, extended range, and reduced interference.

F E A T U R E S • 2.4 GHz Digital Spread Spectrum

•30 Channel Autoscan

•10-Number Memory Dialing

•Desk or Wall Mountable

•Tone/Pulse Dialing

•Handset Volume Control

•32 Digit Redial

•Page/Find

•AutoTalk™

•AutoStandby™

•6 Hour Talk Time

•7 Day Standby Time

•Hearing Aid Compatible

The TRU 241 features include AutoTalk and AutoStandby.

AutoTalk allows you to answer a call by just removing the handset from the base so you don’t have to waste time pushing buttons or flipping switches. AutoStandby allows you to hang up by simply returning the handset to the base.

The UltraClear Plus™ true compander circuitry virtually eliminates background noise. This innovative technology, together with 30 different channels, provides you with the best possible reception during all your conversations.

To protect you against misbilled calls which might result from your phone being activated by other equipment, the TRU 241 has Random Code™ digital security which automatically selects one of over 65,000 digital security codes for the handset and base.

Also, the AutoSecure™ feature electronically locks your phone when the handset is in the base.

To get the most from your phone, please read this owner’s manual thoroughly. Also, be sure to complete the product registration form and mail it in.

Be sure to visit our web site at: www.uniden.com.

RECYCLING

NICKEL-CADMIUM BATTERIES

NICKEL-CADMIUM BATTERIES

MUST BE DISPOSED OF PROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel-cadmium battery packs to a store that recycles nickel-cadmium batteries.

Uniden® is a registered trademark of Uniden America Corporation.

AutoTalk, AutoStandby, Random Code, UltraClear Plus, and AutoSecure are trademarks of Uniden America Corporation.

I N C L U D E D W I T H Y O U R T R U 2 4 1 P H O N E

Also included:

•This Owner’s Manual

•Other Printed Material

•Precautions and Important Safety Instructions

•Memo Sticker

If any of these items are missing or damaged, contact the Uniden Parts Department at (800) 554-3988, 7:00 a.m. to 5:00 p.m. Central, Monday through Friday, or contact us on the web at www.uniden.com.

Beltclip Telephone Cords

I N C L U D E D W I T H Y O U R T R U 2 4 1 P H O N E [ 3 ]

C O N T R O L S A N D F U N C T I O N S

1. memory – Enters or recalls numbers in memory

2. talk – Answers or places calls

3. tone – Switches to tone dialing in pulse dial mode

4. redial – Redials the last number

5. pause – Adds a timed pause in a memory dialing sequence

6. talk/battery low LED – indicates when phone is in use or the battery is low

7. mute – Turns off the handset microphone while you are using the phone

8. flash – Accesses call waiting (if available)

9. volume – Sets both the ringer and earpiece

volumes

10. channel – Selects another channel for clearer

reception

11. handset retainer – Holds handset in base for

wall mounting.

12. status LED – Indicates the phone is in use or the handset is charging

13. page/find – Locates the handset

I N S T A L L A T I O N

Charging the Battery Pack

The rechargeable nickel-cadmium battery pack must be fully charged before using your phone for the

first time. Before plugging the phone line into your new phone, you must charge the battery for

approximately 15 hours without interruption.

1. Remove the handset battery cover.

2. Plug the battery cable into the handset and place the battery pack inside the battery compartment.

3. Replace the battery cover.

▼ Charging the Handset

Place the handset on the base to charge. (The handset can charge in either the face-up or face-down position.)

▼ Low Battery Indicator

When the battery pack in the handset is low and needs to be charged, the talk/battery low indicator flashes.

If this occurs while you are on the phone, you will hear an alert tone. Complete your call as quickly as possible and return the handset to the base for charging.

The plastic connectors will fit together only one way. Make sure the battery’s connector is properly aligned. Use only the Uniden battery pack (model BT-905).

INSTALLATION

A continuous power outlet is an AC outlet which does not have a switch to interrupt its power.

Do not place the power cord in an area where it may create a trip hazard or become chafed and create a fire or electrical hazard.

▼ Cleaning the Battery Contacts

To maintain a good charge,it is important to clean all battery contacts on the handset and base about once a month.

Use a dry cloth or pencil eraser, if necessary.

Do not use any liquids or solvents.

contacts

Selecting a Location

Before choosing a location for your new phone, there are some important guidelines you should consider:

• The location should be close to both a phone jack and continuous power outlet.

•Keep the base unit and handset away from sources of electrical noise such as motors or fluorescent lighting.

•Be sure there is sufficient space to rotate the base unit antenna to a vertical position.

P T

Setting the Dial Mode Switch

Place the switch in the T position for tone dialing, or the P

position for pulse dialing.

Mounting the Base Unit on a Wall

▼ Standard Wall Plate Mounting

This phone can be mounted on any standard telephone wall plate.

1.Snap the wall mount adapter into the notches on the base.

2.Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack.

3.Plug the telephone line cord into the telephone outlet.

4.Wrap the AC adapter cord inside the molded wiring channel. Then wrap the cord around the strain relief notch.

5.Plug the AC adapter into a standard 120V AC wall outlet.

6.Raise the antenna to a vertical position.

7.Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is

firmly seated.

8.On the base unit, pull the handset retainer out of the slot. Rotate it clockwise 180 degrees.

9.Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place.

1

Wall plate

AC adapter

AC outlet

INSTALLATION

Direct Wall Plate Mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10-15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight

of the base and handset. TOP

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

1.Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2.Refer to steps 1 through 9 as in the “Mounting the Base Unit on a

Wall” section. (See page 7.)

[ 8 ] I N S T A L L A T I O N

S E T T I N G U P Y O U R P H O N E

Raising the Antenna

Before using your phone, be sure to raise its antenna to the vertical position.

Connect the base unit

If you want to install the base unit

1.Connect the telephone line cord jack and to a telephone outlet

2.Connect the AC adapter to the to a standard 120 V AC wall

3.Set the base unit on a desk or tabletop and place the handset on the base unit. Then raise the antenna to a vertical position.

Adjusting Ringer/Volume Controls

▼ Ringer Tone and Volume

1.While the phone is not in use, press volume .

2.The phone has two ringer tones, each with two volume levels.

Press volume again until you hear the ringer tone and volume level you want.

▼ Setting the Handset Earpiece Volume

1.While you are on a call, press volume .

2.The phone has four receiver volume levels, Low, Medium, High, and Maximum. Press volume

again until you hear the volume level you want.

When you hang up, the phone keeps the last volume setting selected.

PHONE YOUR UP SETTING

Place the power cord so it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

[ 9 ]

•You have 20 seconds after pressing memory to enter the number you wish to store. Otherwise, an error tone will sound.

•Write down stored numbers on the supplied memo sticker.

Your TRU 241 phone has 10 memory locations for storing important telephone numbers.

1.Remove the handset from the base and press memory. The talk/battery low LED flashes.

Uniden Scanner Manuals On Pdf

2.Enter the phone number you want to store (up to 20 digits).

3.Press memory and enter a number (0-9) on the keypad for the memory location you want to use. You hear a long beep and the talk/battery low LED goes out indicating the number has been stored successfully.

If you select any keys other than 0-9, the handset will beep rapidly and no number will be stored.

Entering a Pause in Memory Dialing

If you would like to use a phone number stored in store a pause in the phone number sequence.

To use this function, follow steps 1 and 2 in “Storing a

button on the handset to place a pause in the phone number sequence.

Follow the remaining steps in the “Storing a Number in Memory” section to complete the operation.

Storing Mixed Tone/Pulse Numbers

If your phone is set up for pulse dialing, you can store a mixed mode number (up to 20 digits) to easily access long distance services.

1.Remove the handset from the base and press memory. The talk/battery low LED flashes.

2.Enter the number to be dialed in pulse mode.

3.Press the tone button on the handset. The tone button counts as one digit and enters a pause.

4.Enter the number(s) to be dialed in tone mode.

5.Press memory and a number (0-9) on the keypad for the memory location you wish to use. You hear a long beep and the talk/battery low LED goes out.

Dialing a Stored Number

To dial a phone number stored in memory, press talk, then press memory and the memory location (0-9). Your phone will dial the stored number.

• Remember, the phone number you wish to store cannot have more than 20 digits, including the pause. (The pause button counts as one digit.)

• If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will

not dial.

E N O H P R U O Y G N I S U

Chain Dialing

Is a prescription monitoring solution that provides state government agencies with accurate, real-time data, compliant with their regulations. This is the same site that law enforcement and benefit plan managers use to request data from MAPS.If you require technical support with the new site, please contact the Appriss Health Customer First Center at 1-844-364-4767. MAPS Users.MAPS software was replaced with Appriss Health’s PMP AWARxE software, effective April 4, 2017.Appriss Health provides the nation's most comprehensive platform for early identification, prevention and management of substance use disorders. Pmp awarxe user support manual michigan. Active in 43 states and territories, Appriss Health’s prescription monitoring solutions lead the nation in prescription data monitoring.Michigan’s new allows licensed professionals (and their delegates) to access data.

After dialing a number you may be requested to enter a special access code, for example, when performing a banking transaction.

1.Store the access code into one of the memory locations (0-9).

2.Dial the main number.

3.Press memory and the memory location of the access code at the appropriate time.

Erasing a Stored Number

Free Pdf Manual Download

1.Remove the handset from the base.

2.Press memory twice.

3.Press the memory location number (0-9) you want to erase. You hear a long beep confirming that you have erased the number.

Mute

You can temporarily turn off the handset microphone so that the person you are talking with cannot hear you. During a telephone call, press mute to turn off the microphone. To cancel mute, press mute or talk.

Replacing a Stored Number

Remember, your TRU 241 phone has 10 memory locations represented by the numbers 0-9 on the keypad. If you store a phone number in one of these locations, then attempt to store a different number in the same location later, the new number will replace the previous one.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. Interference can come from appliances or other phones in your home. This function works only when the phone is in use.

The channel button on the handset allows you to choose between 30 factory set channels. During the course of a conversation, if you hear static or noise which makes it difficult to hear, press channel. The talk/battery low LED flashes, indicating the phone is changing to another channel.

Using the Flash Button

Use the flash button for accessing services such as call waiting.

If you receive a call during your conversation, press the flash button on the handset. Press the flash button again to return to the previous call.

Using the Page/Find Feature

The Page/Find feature sends a signal from the base to the handset causing it to beep. This is useful for locating the handset when it is away from the base. To use this feature, press page/find on the base. The handset beeps for 5 seconds. (Press and hold the page/find button for more than 2 seconds, to get a continuous beep for a minute.)

If you hold down page/find more than a minute, the handset beeps until you release page/find. On the handset press talk to end the page. Press talk again if you do not wish to make a call.

Traveling Out of Range

When you begin to move too far from the base, you will first hear a clicking sound. As you travel further out of range, the voice transmission will begin to break up. If you pass the range limits of the base, your call will terminate.

U S I N G

The paging feature does not work when the phone is in use.

T R O U B L E S H O O T I N G

If your TRU 241 cordless telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact your place of purchase or call customer service at (800) 297-1023.

Caution: Do not attempt to service this unit yourself. Servicing must be performed by qualified personnel.

I N S T A L L I N G T H E B E L T C L I P

If you have wall mounted the base, you cannot place the handset with the keypad facing inside.

H E A D S E T I N S T A L L A T I O N

Uniden Download Page

Your phone may be used with an optional headset, the Uniden HS910. To use this feature, simply plug the headset plug into the headset jack on the handset. Your phone is ready for hands-free conversation.

Headset jack

I N S T A L L I N G T H E B E L T C L I P / H E A D S E T I N S T A L L A T I O N [ 15 ]

Free Uniden Manuals

Uniden Dect 6.0 User Manual

T H A N K Y O U F O R P U R C H A S I N G Y O U R U N I D E N C O R D L E S S P H O N E .

Covered under one or more of the following U.S. patents: 4,511,761 4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905 5,491,745 5,533,010 5,574,727 5,650,790 5,660,269 5,661,780 5,663,981 5,671,248 5,717,312 5,754,407 5,768,345 5,787,356 5,838,721 5,864,619 5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358 5,987,330

®2000 Uniden America Corporation All rights reserved

UCZZ01702BZ

Uniden Gmr1038 2 Manual