28-05-2021

Olympus Digital Voice Recorder Vn-5000 User Manual

Olympus Voice Recorder Vn-5000 Manual
Olympus Digital Voice Recorder Vn-5000 User Manual Online
Olympus Digital Voice Recorder Vn 5000
Sony Digital Voice Recorder
Olympus Digital Voice Recorder 702pc

Page 2: General precautions, For safe and correct usage, Troubleshooting, Specifications, Accessories (optional), H erase all files from a folder, H basic operation of the menu mode

Advertising

Manual Olympus VN-5000. View the Olympus VN-5000 manual for free or ask your question to other Olympus VN-5000 owners. DIGIT AL VOICE REC ORDER. INSTR UCTIONS. Thank you for purchasing an Olympus Digital V oice Recorder. Please read these instructions for information about using the product correctly and safely.

For customers in Europe

“CE” mark indicates that this product complies with the European requirements for
safety, health, environment and customer protection.

This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection
of waste electrical and electronic equipment in the EU countries. Please do not throw
the equipment into the domestic refuse. Please use the return and collection systems
available in your country for the disposal of this product.
Applicable Product : VN-5500

This symbol [crossed-out wheeled bin Directive 2006/66/EC Annex II] indicates
separate collection of waste batteries in the EU countries.
Please do not throw the batteries into the domestic refuse. Please use the return
and collection systems available in your country for the disposal of the waste

Erase

Notes:
• The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a

selected item is not applied.

• If you press the STOP (

4) button during a menu setup operation, the recorder will stop and

apply the items that were set to that point.

You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.

h Erase All Files from a Folder

Other Functions

Notes:
• An erased fi le cannot be restored.
• If operation is not executed for 8 seconds during the setting, it will return to the stop status.
• Completion of erasing may take several seconds. Do not attempt to remove, replace battery

or attempt any other functions on the voice recorder during this period because data may be
corrupted.

1 While the recorder is during

stop mode, press and hold
the

DISP/MENU button for

1 second or longer.

h Basic Operation of the Menu Mode

Using the menu function, you can change various settings according to your preference.

Menu

VCVA indicator

h Index Marks

Index marks can be placed in a file during recording or playback to provide a quick and easy way
of keeping track of important sections in the file.

h Recording Modes [HQ SP LP]

The recording mode can be chosen from [HQ] (high quality sound record-
ing), [SP] (standard recording) and [LP] (long-term recording).

In Menu mode selection...[HQ], [SP], [LP]

Approx. 20 hours

5 minutes

Approx. 53 hours

40 minutes

Approx. 300 hours

30 minutes

Notes:
• The recording time shown above is for one continuous fi le. The available

recording time may be shorter than specifi ed if several fi les are recorded.
(Use the remaining time and recorded time only as references.)

Current recording mode

4 Press the 9 or 0 but-

ton to select [

YES].

a File to be erased

5 Press the PLAY ( ` ) but-

ton.

Read this manual carefully to ensure that you know how to operate it safely and correctly. Keep this
manual in an easily accessible location for future reference.
• The warning symbols indicate important safety related information. To protect yourself and others

from personal injury or damage to property, it is essential that you always read the warnings and
information provided.

Warning regarding data loss:
• Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction,

or during repair work.

• For important recorded content, we recommend you to write it down some where.
• Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect

of the product, repair performed by the third party other than Olympus or an Olympus authorized
service station, or any other reasons is excluded from Olympus’s liability.

Alarm indicator

h Moving File between Folders

You can move files recorded in folders [F], [G], [H] and [I] to other folders. The moved file is
added to the end of the destination folder.

h Resetting the Recorder [CLEAR]

This function resets the current time and other settings to their initial status. It is useful if you are
having problems with the recorder, or if you want to erase the entire memory of the recorder.

Current microphone
sensitivity

1 Press the FOLDER/INDEX button to select

folder.

2 Press the 9 or 0 button to select the

file to be erased.

3 Press the ERASE (

) button.

1 Press the FOLDER/INDEX button to select

the folder to be erased.

2 Press the ERASE (

) button twice.

h Erasing One File at a Time

2 Press the + or – button to

select what you would like
to set up.

• The selected menu item flashes.

3 Press the

0 but-

ton to change the setting.

4 Press the PLAY (`) button

to confirm the setting.

5 Press the STOP (4 ) button to close the

menu.

h Alarm Playback Function [

You can use the alarm playback function to sound the alarm tone for
5 minutes at the scheduled time. Within this 5 minutes, pressing any
button other than the HOLD switch starts the recorder to playback the
preselected file.

In Menu mode selection...[

SET], [On], [OFF]

After

selecting

[

SET], press the PLAY (`) button to set the

time.

Note:
• With the alarm playback function, only one fi le can be played back. Select

a fi le for the function before setting the time.

1 Select the file you want to transfer, and press

the

PLAY (`) button to play it.

Clearing an Index Mark:

While the index number appears on the display, press the

ERASE (s) button.

Notes:
• Up to 10 index marks can be set in a fi le.
• Sequential index marks numbers are reassigned automatically.

1 While the recorder is dur-

ing recording (pause re-
cording) modeor playback
mode, press and hold the

FOLDER/INDEX button to
set an index mark.

• An index number appears on the

display.

Notes:
• The destination folder and the number of the moved fi le appear on the display, and moving is

completed.

• If the destination folder is full (100 fi les), [FULL] appears on the display, and you cannot move the

fi le to that folder.

1 Press and hold the STOP (4) button and the

ERASE (

) button for 3 seconds or longer.

3 Press the 9 or 0 but-

ton to select [

YES].

a Folder to be erased

4 Press the PLAY ( ` ) but-

ton.

2 While the recorder is during playback mode,

press and hold the

DISP/MENU button for 1

second or longer.

3 Press the 9 or 0 but-

ton to select a destination
folder.

4 Press the PLAY (`) but-

ton.

a Destination folder

b Destination number of the file

2 Press the 9 or 0 but-

ton to select [

YES].

3 Press the PLAY ( ` ) but-

ton.

• If you leave the recorder un-

touched for 8 seconds or longer
before you press the PLAY (

` )

button in Step 3, Clear mode will
be canceled, and the recorder will
enter Stop mode.

General Precautions

• Be sure to stop the recorder before replacing the battery.
• Do not leave the recorder in hot, humid locations such as inside a closed automobile under direct

sunlight or on the beach in the summer.

• Do not store the recorder in places exposed to excessive moisture or dust.
• Do not use organic solvents such as alcohol and lacquer thinner to clean the unit.
• Do not place the recorder on top of or near electric appliances such as TVs or refrigerators.
• Avoid sand or dirt. These can cause irreparable damage.
• Avoid strong vibrations or shocks.
• Do not disassemble, repair or modify the unit yourself.
• Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart).
• Keep the unit out of the reach of children.

Batteries:

V Warning:
• Batteries should never be exposed to flame, heated, short-circuited or disassembled.
• Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries.
• Never use any battery with a torn or cracked outer cover.
• Keep batteries out of the reach of children.
• If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a

burning odor:

1 remove the batteries immediately while being careful not to burn yourself, and;

2 call your dealer or local Olympus representative for servicing.

For safe and correct Usage

Q1:

Nothing happens when a button is pressed.

A1:

The

HOLD switch may be set to [HOLD] position.

The batteries may be depleted.

The batteries may be inserted incorrectly.

Q2:

No sound or quiet sound is heard from the speaker while playing back.

A2:

The earphone plug may be plugged into the recorder.

The volume may be set to the minimum level.

Troubleshooting

Recording medium:

Built-in flash memory

Overall frequency:

HQ mode: 200 to 7,900 Hz
SP mode: 300 to 4,700 Hz
LP mode: 300 to 2,900 Hz

Recording time:

HQ mode: Approx. 20 hours 5 minutes
SP mode: Approx. 53 hours 40 minutes
LP mode: Approx. 300 hours 30 minutes

Microphone:

Electret Condenser Microphone (mon-
aural)

Speaker:

Built-in ø 28 mm round dynamic speaker

Maximum power:

120 mW

Specifications

Ni-MH Rechargeable Battery Charger:

BU-400 (Europe only)

Ni-MH Rechargeable Battery:

BR401

Connecting cord (Earphone jack ↔ Microphone jack):

KA333

Noise-Cancellation microphone:ME52
Electret condenser microphone:

ME15

Telephone pickup:

TP7

Accessories (Optional)

h Microphone Sensitivity [

]

h Using the Variable Control Voice

Actuator [VCVA]

h System Sounds [BEEP]

Informs a button operation or a wrong operation of the recorder by sound.
System sounds may be turned off.

In Menu mode selection...[On], [OFF]

Note:
• If the alarm playback function has been set, the alarm will sound at the

scheduled time even if the system sounds are disabled.

h Timer Recording [TIMER]:

You can schedule for automatic recording, specifying the start time and
end time of recording. When the timer-controlled recording completes,
the setting is released.

In Menu mode selection...[

SET], [On], [OFF]

After

selecting

[

SET], press the PLAY (`) button to set the

time.

To cancel the timer setting:
For the timer in the menu mode, select [

OFF], and press the

PLAY (`) button.

Earphone jack (monaural):

ø 3.5 mm diameter, impedance 8 Ω

Microphone jack (monaural):

ø 3.5 mm diameter, impedance 2 kΩ

Power supply:

Two AAA (LR03) batteries or Two Ni-MH
rechargeable batteries

Continuous battery:

Alkaline batteries: Approx. 39 hours
Ni-MH rechargeable batteries: Approx.
22 hours

Dimensions:

102 (L) mm x 36 (W) mm x 20.5 (T) mm
(without protrusions)

Weight:

63 g (including battery)

When the microphone senses that sound has reached a preset volume,
the built-in Variable Control Voice Actuator (VCVA) starts recording
automatically, and stops it when the volume drops. Particularly helpful for
extended recording, the VCVA not only conserves memory by turning off
recording during silent periods, but also makes playback more efficient
and convenient.

In Menu mode selection...[On], [OFF]

Notes:
• During recording, press the + and – buttons to adjust the VCVA level in

15 levels.

• The Record/Play indicator light is lit during recording. When the recorder

is in Standby mode, the Record/Play indicator light fl ashes and [VCVA]
fl ashes on the display.

• Battery life is measured by Olympus. It varies greatly according to the type of batteries used and the

conditions of use.

• Your recorded contents are for your personal use or pleasure only. It is prohibited to record copyrighted

material without permission of the copyright holders according to copyright law.

• Specifi cations and design are subject to change without notice for improvement of performance.

Q3:

Recording is not possible.

A3:

By pressing the

STOP (4) button repeatedly while the recorder stops, check if

the display shows:

• The remaining recording time in the selected folder may have reached [00:00].

• The number of files is 100.

Check if the display shows [

FULL] by pressing the REC (s) button.

Q4:

The playback speed is too fast (slow).

A4:

The recorder may be set to fast (slow) Playback.

For customers in North and South America

USA RFI:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.
Canadian RFI:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Cet appareil numérique ne dépasse pas les limites de Catégorie B pour les émissions de bruit radio
émanant d’appareils numériques, tel que prévu dans les Règlements sur l’Interférence Radio du
Département Canadien des Communications.

Notes:
• To view the current setting, select [On], and press the PLAY (

`) button.

• With this function, you can set only the start and the end time of recording. The current settings of

the recording mode, microphone sensitivity, VCVA and folder are applied for the settings before
you set timer-controlled recording.

• The setting exceeding the remaining recording time is not allowed.
• You can record at any time even if it is not within the specifi ed recording duration. However, if that

makes the remaining recording time insuffi

cient for the timer-controlled recording, the recording

will not complete.

• If any operation is ongoing, the timer-controlled recording is overridden.

Menu setting screen

Move the selection one position down/decrease the
number

Move the selection one position up/increase the number

Move the
selection one
position to the
right

Move the

selection one

position to

the left

Confirm the

setting

To cancel an alarm playback:

For [k] in the menu mode, select [

OFF] and press the PLAY (`) button.

Notes:
• Regardless of the selected folder, once the alarm playback is set, it operates every day unless the

setting is canceled.

• To view the current setting, select [On], and press the PLAY (

`) button.

• The alarm tone stops automatically if no button is pressed within 5 minutes after the alarm starts.

The fi le is not played back in this case.

• If the recorder has no recorded fi le in the selected folder, the alarm playback function is not

available.

• Alarm playback occurs every day unless it is set to [OFF].

Timer indicator

Microphone sensitivity is adjustable to meet your recording needs.

In Menu mode selection...[

], [

]

High-sensitivity mode that records
sounds in all directions.

Low-sensitivity mode suited for
dictation.

Notes:
• To ensure successful recording, make a test recording to select

appropriate microphone sensitivity before recording.

• If you select [g], we recommend setting the recording mode to [HQ]

to best take advantage of the higher sensitivity.

• If you select [g], background noise may be high depending on the

recording conditions.

Advertising

Popular Brands

Popular manuals

Instructions, Digital voice recorder, Getting started

Advertising

h How to Use the

Strap

State of the recorder

Operation

Display

While in stop mode

Press and hold the STOP
(

4) button

The total number of files recorded in the
folder and remaining recording time appears
on the display.

While in record mode

Press the DISP/MENU
button

The display switches between current
recording time and remaining recording
time.

While in stop mode or
playback mode

Press the DISP/MENU
button

Playing time ➔ Remaining playing time
➔ Recording date of the file ➔ Recording
time of the file ➔ Playing time …

DIGITAL VOICE RECORDER

VN-5500

VN-5000

INSTRUCTIONS

Thank you for purchasing an Olympus Digital Voice Recorder.

Please read these instructions for information about using the product correctly and safely.

Keep the instructions handy for future reference.

To ensure successful recordings, we recommend that

you test the record function and volume before use.

U1-BS0120-01

AP0807

Getting Started

Notes:
• You can switch the time indication between the 12-hour system and the 24-hour system by

pressing the DISP/MENU button while you are setting the hour or minute.

• You can change the order of the date indication by pressing the DISP/MENU button while you

are setting the year, month, or day.

Example: July 14, 2008

Current folder

1 Press down on the arrow and slide the

battery cover open.

2 Insert two size-AAA alkaline batteries,

observing the correct polarity.

3 Close the battery cover completely.

• Time and date display appears.
• The

“Hour” indicator flashes, indicating the start

of the time and date setup process. (See “Setting
Time and Date [TIME]

” for details).

h Inserting Batteries

1 Press and hold the DISP/MENU button for 1

second or longer.

h Setting Time and Date [TIME]

If you have set the time and date, information as to when a sound file was recorded is stored
automatically with that file.

h Notes on the Folders

The recorder provides four folders, [F], [G], [H] and [I]. To change the
folder selection, press the FOLDER/INDEX button while the recorder is
stopped. Each recorded file is stored in a folder.
Note:
• Using folders to classify fi les makes it convenient to fi nd fi les you want

to access later. Up to a total of 100 fi les can be recorded in each folder.

Strap hole

h Identification of Parts

When you install batteries for the first time or each time you replace the batteries, the
“Hour” indication will flash. In such a case, be sure to set the time and date by following
steps

4 through 7 described below.

h Power Supply

The HOLD switch functions as a power button. When you do not use the recorder, set the HOLD
switch to the [HOLD] position while the recorder is stopped. This will power off the recorder and
minimize the battery drain.

Built-in speaker

• Strap is not supplied.

1 Built-in Microphone

2MIC (Microphone) jack

3HOLD switch

4STOP (4) button

5PLAY (`) button

60 (Rewind) button

7 Battery cover

8FOLDER/INDEX

button

Power on: Reset the

HOLD switch.

Power off: Set the

HOLD switch to the [HOLD]

position.

Standby Mode and Display Shut Off:

If the recorder is stopped or paused for 60 minutes
or longer during recording or play back, it goes into
Standby (power-save) mode, and the display shuts off.
To exit Standby mode and turn on the display, press
any button.

hHold

Set the HOLD switch to the [HOLD] position. All opera-
tion buttons are disabled. This feature is useful when the
recorder has to be carried in a handbag or pocket.
Remember to reset the HOLD switch before attempting
to use the recorder.
Notes:
• The alarm will sound at the scheduled time even if the

recorder is set to [HOLD] position. The recorder will
then begin to play the fi le associated with the alarm
once you press any button.

• The recorder functions as follows with the HOLD switch

set to the [HOLD] position:
– If the recorder is playing, the display goes dark when

playback of the current file has completed.

– If the recorder is recording, the display goes dark

when the recorder stops recording automatically
upon running out of free memory.

2 Press the + or – button to

select [

TIME].

3 Press the PLAY ( ` ) but-

ton.

• The

“Hour” indicator flashes.

Olympus Voice Recorder Vn-5000 Manual

4 Press the + or – button to

set the “

Hour”.

5 Press the PLAY ( ` ) or

9 button to accept the
“

Minute”.

• The

“Minute” indicator flashes.

• Pressing

the

0 button enables

the “Hour” setting again.

6 Press the + or – button to

set the “

Minute”.

• Repeat

steps

5 and 6 to con-

tinue to set the “Year”, “Month”
and “Date” in the same way.

7 After setting the “Date”,

press the

PLAY (`) or 9

button.

• This completes the time and date

setup procedure.

To Pause:

While the recorder is during recording mode, press
the

REC (s) button

• [PAUSE] appears on the display and the record/play indicator

light flashes.

To Resume Recording:

Press the

REC (s) button again.

• Recording will resume at the point of interruption.

h Notes for Recording

• If [FULL] appears on the display, you cannot record in the selected folder. In such a case, erase

unnecessary fi les.

• If the recorder is placed directly on a table when recording a meeting, it tends to pick up table

vibrations. Put a notebook or other item between the table and the recorder so that the vibration
is not easily transmitted for clearer recording.

• Even if you press the DISP/MENU button, the display will not change to current recording time

if the remaining recording time is 5 minutes or less.

• When remaining recording time is less than 60 seconds, the record/play indicator light starts

fl ashing in red. When the recording time is decreased to 30 or 10 seconds, the light fl ashes
faster.

• The recorder will enter Stop mode if it has been left paused for 60 minutes or longer.
• In case of diffi

cult acoustic conditions or low speaker’s voice, recording in [HQ] is recommended.

Also, usage of an external microphone (sold separately) could improve the quality of
recordings.

The external microphone and other devices can be connected
and the sound can be recorded.
• When using an ex ternal microphone, selec t adequate

microphone, such as a Noise-Cancellation microphone or
Electret condenser microphone (optional).

• To connect the recorder to an external device, use the

connecting cord KA333 (optional), and the stereo/monaural
converting plug adapter supplied with KA333.

• The input level cannot be adjusted on this recorder. When

you connect the recorder to an external device, execute a test
recording and adjust the output level of the external device.

h LCD Display Information

Recording

1 Press the FOLDER/INDEX

button to select the desired
folder.

a Current microphone sensitivity

b Current folder

2 Press the REC (s) button

to start recording.

• The record/play indicator light

turns red, and recording starts.

c Current recording mode

d Current file number

e Recording level meter

f Recording time

3 Press the STOP (4) button

to stop recording.

• New recordings are saved as the

last file in the folder.

g Remaining recording time

h Recording from external Microphone or other Devices

Playback

1 Press the FOLDER/INDEX

button to select the de-
sired folder.

a Current folder

2 Press the 9 or 0 button to select the file

to playback.

3 Press the PLAY (`) button

to start playback.

• The record/play indicator light

turns green, and the elapsed
playing time is indicated on the
display.

b Current file number

c Playing time

To Stop:

Press the

STOP (4) button.

• The recorder stops in the middle of the file being played.

Fast Forward:

While the recorder is during playback mode, press and
hold the

9 button.

• When you release the

9 button, the recorder will resume

normal playback.

Rewind:

While the recorder is during playback mode, press and
hold the

0 button.

• When you release the

0 button, the recorder will resume

normal playback.

Notes:
• When the slow playback mode is selected, the [J] appears and, for the fast playback mode, [K]

appears on the display while the recorder is playback.

• The recorder stops playback when you press the STOP (

4) button while playback in the slow/fast

mode, or when it reaches to the end of the fi le. If you once press the STOP (

4) button and start

playback again, the recorder will playback fi les in normal speed as well.

While the recorder is during playback mode (playback
or playback in slow/fast mode), press the

9 or 0

button forwards or rewinds to the beginning of the
next file or the file being played respectively.

Notes
• If an index mark is encountered midway, playback begins at that

point. (See “Index Marks” for details)

Normal speed

Slow Playback

(-25%)

Fast Playback

(+50%)

While the recorder is during playback mode, press the

PLAY ( `) button.

You can select an option for the display of the recorder. This will help review and confirm different
recorder settings and file information.

An optional Ni-MH Rechargeable Battery (BR401)
from Olympus can be used for the recorder.

Replacing Batteries:

When [N] appears on the display, replace the batteries as soon aspossible. Size-AAA alkaline
batteries are recommended. When the batteries are depleted, [O] appears on the display, and
the recorder shuts off. It is recommended to set the HOLD switch to the [HOLD] position before
you replace batteries to maintain the current settings (Time and date, etc.). For your convenience,
the recorder also logs the current settings in nonvolatile memory at hourly intervals.

A audio input
terminal of
other devices

9EAR (Earphone) jack

0 Display (LCD panel)

! Record/play indicator

light

@REC (s) button

#+ button

$9 (Fast Forward)

button

%– button

^DISP/MENU button

&ERASE (

) button

h Changing Playback Speed:

h To Pause Recording

h Canceling Playback

h Forwarding and Rewinding

Notes:
• The end of the fi le is located by pressing and holding the

9 button during fast forwarding.

The recorder will pause at the end of the fi le. If you do not release the

9 button, the recorder

will continue to fast forward.

• The beginning of the fi le is located by pressing and holding the

0 button during rewinding.

The recorder will pause at the beginning of the fi le. If you do not release the

0 button, the

recorder will continue to rewinding.

• When the index mark is shown in the middle of a fi le, it will stop temporarily in the position of the

index mark.

h Locating the Beginning of the File:

Introduction

• The contents of this document may be changed in the future without advanced

notice. Contact our Customer Support Center for the latest information relating to
product names and model numbers.

• The utmost care has been taken to ensure the integrity of the contents of this

document. In the unlikely event that a questionable item, error, or omission is
found, please contact our Customer Support Center.

• Any liability for passive damages or damage of any kind occurred due to data loss

incurred by a defect of the product, repair performed by the third party other
than Olympus or an Olympus authorized service station, or any other reason is
excluded.

h Safe and Proper Usage

Before using your new recorder, read this manual carefully to ensure that you know how to operate
it safely and correctly. Keep this manual in an easily accessible location for future reference.
• The warning symbols indicate important safety related information. To protect yourself and others from

personal injury or damage to property, it is essential that you always read the warnings and information
provided.

4 Press the + or –button to select the proper

sound volume.

• The display shows the volume level. You can choose

between [00] to [30].

Converting
plug adapter
of KA333

Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjyuku-ku, Tokyo 163-0914, Japan. Tel. 03-3340-2111

http://www.olympus.com

3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. Tel. 1-888-553-4448

http://www.olympusamerica.com

(Premises/Goods delivery) Wendenstrasse 14-18, 20097 Hamburg, Germany. Tel. 040-237730

(Letters) Postfach 10 49 08. 20034 Hamburg, Germany.

http://www.olympus-europa.com

Vision House 19 Colonial Way Watford Herts WD24 4JL. Tel. +44(0) 1923 831000

http://www.olympus.co.uk

4
5